Velocity
Purpose-built telemetry analysis for professional motorsport, intuitive for drivers and coaches and deep enough for every question an engineer asks. Highly performant even on weaker hardware, with extensive interactive visualizations, a powerful math channel and event engine, cloud integration and AI integration for Claude and ChatGPT.



Extensive interactive visualizations
Plots, track maps, lap tables, histograms, scatter and G-force plots, readouts and synchronized video. Every view is fully interactive and follows the same cursor.
- Choose between multiple cursor types Compare laps by their position on track, by travelled distance or by laptime.
- Track maps Powerful track map visualizations. Compare the cars' positioning or visualize data, so you can see at a glance where the time is won.
- Tables and value widgets Analyze complex metrics, by lap and by sector.
- Histograms, scatter and G-force plots Visualize multidimensional data and make connections visible.
- Synchronized video Onboard video, always in sync with your data.

Laps, sectors and track definitions
Velocity splits every outing into laps and sectors from a track definition, so comparisons line up sector by sector.
Optimal laps
The best sectors combined into an optimal lap, per file and across everything loaded.
Reference laps
Pick a reference lap and compare every other lap against it.
Track definitions
Define tracks based on your laps, automatically built for your car and the conditions.

Powerful math channel and event engine
Describe a calculation or a condition once, and Velocity applies it to every lap of every outing.
- Math channels Derive new channels from existing ones, with units, a live preview and a reusable library.
- Event detectors Find every moment a condition is met, and list the events for each outing.
- Script settings Named values with units, set globally or per page, so one script fits every car.


Cloud integration
Velocity connects to Newton Cloud and to Newton devices on track.
Your team's library
Open the current event, outings, laps and track definitions from Newton Cloud directly.
Upload
Share outings, laps and track definitions with the team.
Live data
Analyze live data from Newton devices while the car is on track.

AI integration
Velocity is architected from the ground up to be fully steered by AI agents. Connect Claude or ChatGPT and they set up visualizations, analyze laps and explain where the time is, doing for race car data analysis what AI agents are doing for software.
Sets up your analysis
Ask for a braking comparison and the agent builds the page: plots, track maps and readouts, configured for the question.
Analyzes laps
Compares laps, sectors and drivers and explains the differences with numbers from your data.
Builds math channels and event detectors
Drafts new channels and detectors, checks them against your laps and adds them to your library.
Works with the tools you use
Connect Claude Desktop, Claude Code, ChatGPT Desktop or Codex in Velocity's settings, or script Velocity from the command line.
Included in Velocity Pro.

Compare my fastest lap with the reference lap and show me where I'm losing time in the braking zones.
- Step 5: Compared lap and sector times of the fastest lap (Practice 2, lap 3) against the reference (Practice 1, lap 4) telemetry.
query_ with_ reference - Step 7: Checked channel mappings of Monza Practice 2: no throttle, brake, steering or gear mapping; logger channels ecu_ath, log_pbrake_f, log_asteer, ecu_gear exist telemetry.
channels - Step 9: Mapped throttle, brake pressure, steering, gear and RPM to the logger channels in Monza Practice 2 source_
configuration. configure - Step 16: Created page 'Braking zones: fastest vs reference': Delta T, Speed, Brake and Throttle plots, a time-gain track map (±0.04 green/red scale) and a lap table, with the Heavy Braking detector marking every braking zone pages.
compose - Step 18: Highlighted the Lesmo braking zones (2034–2606 m) as the comparison range cursor.
set_ comparison_ range - Step 22: Added an Events list of the detected braking zones (peak brake pressure per zone) for both laps widgets.
create
Your fastest lap (Monza Practice 2, lap 3, 1:52.237) is 1.139 s quicker than the reference (Practice 1, lap 4, 1:53.376), and most of that comes from braking zones: Rettifilo −0.49 s (4.7 km/h more minimum speed, full throttle 17.5 m earlier), Ascari −0.23 s and Roggia −0.19 s.
Where you lose time is the two Lesmos, +0.10 s across the highlighted section:
- Lesmo 1, +0.08 s: you brake at the same point (2,094 m vs 2,096 m) but come off the brake 10 m earlier, carry 0.4 km/h less minimum speed (123.8 vs 124.2 km/h) and reach full throttle 11 m later.
- Lesmo 2, +0.03 s in the corner, then another +0.07 s on the run to Ascari: full throttle comes 10 m later, so you are about 2 km/h slower onto the straight (157 vs 159 km/h at 2,650 m).
- Parabolica is a wash (−0.002 s): you brake 7.5 m earlier and carry 5.2 km/h more minimum speed, but get back to full throttle 84 m later than on the reference.
I built a 'Braking zones: fastest vs reference' page with delta, speed, brake and throttle plots, a time-gain map and the detected braking zones; the cursor is on Lesmo 1 and the Lesmo section is highlighted.
Works with your data
Velocity loads Newton recordings, Racelogic VBOX files, Pi Toolbox exports and CSV files, and it is just as useful for your sim racing data from iRacing.
Newton recordings
Telemetry and video recorded by Newton devices (.vel, .xvel, .avel).
Sim racing
iRacing telemetry (.ibt), analyzed with the same tools as your real-world data.
Racelogic VBOX
VBOX recordings (.vbo).
Pi Toolbox
Pi Toolbox exports (.txt, .xls).
CSV
Any data you can export as CSV.

Plans and pricing
Choose Sim or Pro when you need more formats, AI integration, math channels or cloud integration.
-
Velocity Free
For files recorded by Newton devices.
€0
Download- Newton files (.vel, .xvel, .avel)
- Requires a free Newton account
-
Velocity Sim
For sim racing and simulator work.
€5 per month
Subscribe to SimEverything in Free, plus:
- iRacing telemetry (.ibt)
- CSV files
Recommended for professional teams
Velocity Pro
For race engineers and teams.
€25 per month
Subscribe to ProEverything in Sim, plus:
- Every supported format, including Racelogic VBOX (.vbo) and Pi Toolbox exports
- Math channels
- Event detectors
- Cloud integration, including live data from Newton devices
- AI integration for Claude and ChatGPT, including the MCP server and the Velocity command line
Prices include VAT.
- Every plan needs a Newton account, including Free.
- Paid plans run on one computer at a time. Move your license to another computer whenever you like.
- Switch plans or cancel any time.
Velocity for teams
Teams buy Velocity Pro seats in Newton Cloud. Any team member can use a free seat, and a seat follows its member from one computer to another.
Buy seats in Newton CloudSupported files
| Format | Files | Plans |
|---|---|---|
| Newton | .vel, .xvel, .avel | All plans |
| iRacing | .ibt | Sim and Pro |
| CSV | .csv | Sim and Pro |
| Racelogic VBOX | .vbo | Pro |
| Pi Toolbox export | .txt, .xls | Pro |
Download Velocity
No release is published here yet.




